field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

city

state

<h3>Job Description</h3>
Job Description
SUMMARY
Mixes all types of herbs according to formula specifications. Drives forklift to move, load or unload materials by performing the following duties.  
  
ESSENTIAL DUTIES AND RESPONSIBILITIES 
Include the following- 
<ul>
<li>Reads orders of products that need to be mixed. </li>
<li>Requests materials needed to mix from the warehouse. </li>
<li>Mixes herbs according to formulas, using scales and/or other types of measuring equipment. Places mixed herbs into barrel, boxes or containers. </li>
<li>Places labels on finished mixed product with correct part and lot numbers. Gets mixed formulated products ready to be sent toother facility. </li>
<li>Drives forklift to move, load or unload product. Assists in yearly inventory. </li>
<li>Other duties may be assigned. </li>
</ul>
  
QUALIFICATIONS 
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  
  
EDUCATION and/or EXPERIENCE 
High school diploma or general education degree (GED); or one to two years related experience and/or training; or equivalent combination of education and experience.  
LANGUAGE SKILLS 
Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.  
  
MATHEMATICAL SKILLS
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.  
REASONING ABILITY 
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.  
  
CERTIFICATES, LICENSES, REGISTRATIONS A forklift license is required for this job.  
  
PHYSICAL DEMANDS 
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  
  
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to stand and walk. The employee is occasionally required to talk or hear and taste or smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, and color vision.  
  
WORK ENVIRONMENT 
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  
While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate.  
Sunrider Manufacturing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Formulations Mixer/Handler

<h3>Job Description</h3>
Job Description
Position: Mixer SHIFT: 3rd shift 9pm to 5:30am Monday-Friday with Overtime as needed. Pay: $20.89 + $1.50 shift differential SUMMARY Mixers are responsible for correctly mixing approved ingredients together to create a mixture specific to company standards and specifications. Mixers operate equipment and machinery in a safe and efficient manner. They work on a strict timeline to ensure the freshest product possible while adhering to recipes already set in place. Mixers adhere to all Food Safety guidelines, and Good Manufacturing Practices (GMPs). ESSENTIAL DUTIES AND RESPONSIBILITIES Responsible for adding approved ingredients in the proper order into mixers. 
<ul>
<li>Inspects materials and products for defects and to ensure conformance to specifications.</li>
<li>Operates all scales, meters, mixers, and related mixing equipment.</li>
<li>Weighs or measures materials or products to ensure conformance to specific recipes.</li>
<li>Identifies and marks materials, products, and samples, following instructions.</li>
<li>Modifies materials and products during manufacturing process to meet requirements.</li>
<li>Feeds materials into machines and equipment to process and manufacture products.</li>
<li>Loads materials and products into machines and equipment, using hand tools and moving devices.</li>
<li>Removes materials and products from machines and equipment, using hand tools and moving devices.</li>
<li>Understands and follows production schedules</li>
<li>Communicates effectively with peers, and supervision.</li>
<li> Handle startup and shut down duties pertaining to mixing equipment at the beginning, end and during each shift.</li>
<li>Make-certain that each component of the mixing equipment is in good repair and works in accordance to regulations set by the company</li>
<li>Perform regular and preventative maintenance on mixing equipment to ensure optimum work cycles</li>
<li>Handle / discard waste in a safe manner</li>
<li> Educate workers on exercising caution to avoid accidents and prevent injuries</li>
<li> Maintain a clean and orderly work area by ensuring that floors and food handling equipment is clean and organized appropriately</li>
<li> Assist in developing SOPs and handle reviews of manufacturing batch records</li>
<li> Reset machines following malfunctions or need for repeated cycles</li>
<li> Create daily reports regarding product made and used. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required.</li>
<li>Ability to work in cold and warm environments.</li>
<li>Ability to work in a fast-paced environment.</li>
<li>Forklift certified.</li>
<li>Lift products and boxes weighing up to 50 lbs.</li>
<li>Have own or ability to acquire steel toe boots.</li>
<li>Individual must be willing to work as a team member.</li>
<li>Ability to read and write in English.</li>
<li>Ability to work M-F and OT when needed</li>
</ul>
EEO
We are committed to an inclusive workplace where diversity in all its forms is championed. We are proud to be an equal opportunity workplace and we are an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. 

Privacy Policy
Mars and its family of brands is committed to transparency and responsibility in how we handle the personal data entrusted to us by our customers and consumers. To learn more about our privacy policy please follow this link.

3rd shift Mixer

<h3>Job Description</h3>
Job Description

Join Lantech as a 1st Shift Level 4 CNC Machine Operator in our CLIMATE CONTROLLED facility. We offer a 4-day work week with overtime opportunities, quarterly profitability bonuses, and TONS of opportunities for advancement. Our Level 4 Machine Operators START at $23.50
1st Shift: Mon - Thu, 5:00am - 3:30pm
Who are We?
Lantech is widely recognized as the world leader in stretch wrapping technology. Not surprisingly, since we invented the first rotary stretch wrapping machine and have continually re-invented the product with new features and performance-enhancing technology ever since. We also are industry leaders in robust and efficient case and tray handling equipment. Today, Lantech equipment is found worldwide, with technical support in multiple languages. 
Why You Matter:
As a CNC Machine Operator of the Decimal team, you will contribute to creating quality fabricated machine parts every day. This work plays a critical role in supplying the components used by Lantech's assembly departments to construct Lantech's stretch wrapping machinery, which is used around the world to move essential goods securely and efficiently.
Here's a Glimpse at What you'll Do:
As a CNC Machine Operator at Lantech you will:
<ul>
<li>Set up, operate, and monitor CNC machines to produce quality parts according to specifications. </li>
<li>Perform CNC setup and part inspection. </li>
<li>Responsible for editing CNC programs as needed to ensure accuracy and efficiency. </li>
<li>Read digital/dial calipers and micrometers.</li>
<li>Communicate with other areas in regard to parts and materials. </li>
<li>Read blueprints and follow standard work to ensure safety, quality, and productivity goals are met. </li>
<li>Stand 9-10 hours per day. </li>
</ul>
What are We Looking For? (Requirements)
We are looking for someone who:
<ul>
<li>Experience operating CNC mills, lathes, or related CNC/ Manual equipment.</li>
<li>Ability to perform machine setup, including tooling, fixtures, and offsets.</li>
<li>Strong blueprint reading and technical drawing interpretation.</li>
<li>Skilled with precision measurement tools (calipers, micrometers, gauges, etc.).</li>
<li>Ability to edit CNC programs to maintain the quality and accuracy of parts.</li>
<li>Detail-oriented and able to work effectively in a fast-paced production environment.</li>
<li>Strong teamwork and communication skills with commitment to safety and quality</li>
<li>Is able to understand metrics and standards.</li>
<li>Is capable of lifting loads up to 50 lbs. </li>
<li>Is able to complete basic mathematical operations.</li>
<li>Has basic computer skills (including Microsoft Outlook). </li>
<li>Is legally authorized to work in the U.S. </li>
</ul>
Education &amp; Experience:
<ul>
<li>A High School diploma or equivalent is required. Additional training from vocational or trade school is a plus.</li>
</ul>
Desired Skills:
<ul>
<li>Multi-machine CNC experience (mills, lathes, routers, etc.).</li>
<li>Familiarity with G-code and CNC program optimization.</li>
<li>Exposure to or experience in a sheet metal fabrication environment.</li>
<li>Forklift operation experience (preferred, not required).</li>
<li>Lean knowledge and continuous improvement mindset.</li>
<li>Ability to manage multiple tasks and prioritize effectively.</li>
</ul>
Reasons why you will love working at Lantech:
<ul>
<li>Job Stability: Lantech is an essential business that is thriving in the manufacturing industry and growing exponentially in the market. We believe that job stability is not only about your ability to hold a job. It also means you enjoy what you are doing as well as the benefits and compensation offered.</li>
<li>Growth and Career Opportunities: Each manufacturing position at Lantech is specifically created with a path for advancement in mind! As our associates further develop their skills, they are eligible for pay increases and promotional opportunities. Come join the Lantech team and stretch your career!</li>
<li>Competitive Benefits: 401k + Company Match, Quarterly profitability bonus, Medical, Dental, Vision, Paid Life, STD &amp; LTD, Paid Life insurance, Paid Vacation, PTO, 8 paid holidays per year.</li>
<li>Competitive Pay</li>
<li>Casual Dress</li>
<li>GREAT CULTURE</li>
<li>&amp; More!</li>
</ul>
 
#LT Job Posted by ApplicantPro

CNC Machine Tool Operator - 1st Shift

<h3>Job Description</h3>
Job Description
I came across your background and was genuinely impressed. Your machining experience aligns extremely well with a full-time, direct-hire Machinist opportunity I’m supporting for a well-established, industry-leading manufacturing company in Ohio (company name kept confidential).
We currently have openings at two locations, and you can choose the shift that fits your lifestyle best:
???? Middletown, OH — 1st Shift
Mon–Fri | 7:00 AM – 3:30 PM
???? Bolivar, OH — 3rd Shift
Mon–Fri | 10:30 PM – 7:00 AM
???? Pay Range: $28–$40/hr (based on experience)
Employment Type: Full-Time, Direct Hire
Remote: No
Position Overview
You will play a key role in machining ferrous and non-ferrous materials to tight tolerance specifications. This role involves interpreting work instructions and blueprints, maintaining high accuracy, and utilizing a range of machining equipment.
Equipment You’ll Work With:
<ul>
<li>
Manual &amp; CNC lathes and mills
</li>
<li>
Vertical &amp; horizontal boring mills
</li>
<li>
Horizontal saws
</li>
<li>
Overhead cranes
</li>
<li>
Forklifts
</li>
<li>
Precision measuring tools (micrometers, calipers, indicators, thread gauges)
</li>
</ul>
What This Company Offers
<ul>
<li>
A stable, long-established operation with strong employee retention
</li>
<li>
A clean, well-equipped machine shop
</li>
<li>
Opportunities for skill development and long-term growth
</li>
<li>
Supportive, technician-focused leadership
</li>
<li>
Strong safety culture and consistent workflow
</li>
</ul>
Job Qualifications
Education:
<ul>
<li>High school diploma or equivalent</li>
</ul>
Experience:
<ul>
<li>
3–5 years of machine shop experience (hydraulics industry experience is a plus but not required)
</li>
<li>
CNC and manual machining experience
</li>
<li>
Blueprint reading and interpretation skills
</li>
</ul>
Skills &amp; Attributes:
<ul>
<li>
Strong attention to detail
</li>
<li>
Good judgment and quality mindset
</li>
<li>
Ability to use precision measuring instruments
</li>
<li>
Ability to work in a fast-paced environment
</li>
</ul>
Physical Requirements:
<ul>
<li>
Lift/carry 40 lbs., 50 lb. pull
</li>
<li>
Frequent standing, movement, and repetitive hand motions
</li>
<li>
Work environment fluctuates from quiet to moderate/loud depending on the area
</li>
</ul>
About the Company (Confidential)
This opportunity is with a leading manufacturing company known for its reliability, strong benefits, and long-term workforce stability. The environment is hands-on, team-oriented, and supports machinists advancing their skills. (Full company details will be shared privately during our conversation.)
If this sounds like something you’d be open to exploring, I’d love to share more and learn what you’re looking for.
What’s the best time/number to reach you?
You can also call or text me directly at (469) 384-2062 Ext: 6293.
Looking forward to connecting,
You should be proficient in:
<ul>
<li>CNC Programming</li>
<li>Forklift Licensed</li>
<li>Manual Machining Skills</li>
</ul>
Machines &amp; technologies you'll use:
<ul>
<li>Manual Lathe</li>
<li>Boring Mill</li>
<li>Thread Rolling Machine</li>
<li>Manual Vertical Mill</li>
</ul>

Manual Machinist

<h3>Job Description</h3>
Job Description
Schumann Printers, Inc. located in Fall River, Wisconsin is one of the nation's leading commercial printing, binding and mailing service companies. Our family-owned and operated facility is ready to welcome you aboard our award-winning team.
We currently have an opening for a Second Shift Industrial Electrician. This role would work on offset web printing presses and supporting equipment. (Heidelburg/Goss)
The right person for this role should be able to read electrical prints, use a multi meter to troubleshoot and trace issues and navigate the different voltage ranges. They should be experienced with A/C and D/C power for motors and drives. They should have knowledge of Profibus technology and application. Having some experience programming and troubleshooting PLCs is a plus. In addition, they should be able to do some mechanical preventative maintenance requests. If this sounds like you, we encourage you to apply.
In addition to our great work environment, we offer a competitive benefits package to include: Medical Insurance, Dental and Vision, Flex Spending Account (FSA), Health Savings Account (HSA), Health Reimbursement Arrangement (HRA), Life insurance, Disability Insurance, Paid Vacation, Paid Holidays, 401(k) with Employer Match and More.
2nd Shift - Monday - Thursday, 2 pm - 11 pm, Friday 2 pm - 6 pm
To learn more about us, please visit our website at <a href="http://www.spiweb.com" target="_blank">www.spiweb.com</a>.
Schumann Printers, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other category protected by law.

Industrial Electrician

<h3>Job Description</h3>
Job Description
The Milling Machine Operator operates equipment used for milling and removing existing asphalt to prepare the surface for new asphalt.
Job Duties
<ul>
<li>Responsible for control and operation of the milling machine.</li>
<li>Operates milling machine to properly mill asphalt to desired specifications based on usage.</li>
<li>Manipulates hand or foot levers to control movements of milling machine that mills asphalt on roadways and related surfaces such as parking lots, streets, etc.</li>
<li>May perform other related duties, such as preventive maintenance on all milling machinery.</li>
<li>The operator is responsible for the efficient working condition of the equipment and is expected to perform minor servicing and maintenance or refer major problems to the Foreman or Superintendent.</li>
<li>Any other duties assigned by your Foreman or Superintendent.</li>
</ul>
Education &amp; Experience
High School graduate which may be substituted with specific work-related experience.
Preferred Background: 
<ul>
<li>Road Construction</li>
<li>Construction</li>
</ul>
Certificates and /or Licenses
<ul>
<li>Current Driver’s License</li>
</ul>
Company DescriptionGray &amp; Son was founded in 1908 with a name synonymous with quality in commercial and residential construction. Through the years, we’ve expanded our services, added to our fleet and welcomed new employees, but we’ve never stopped living up to our name. Today, Gray &amp; Son is a leading contractor in the Baltimore metropolitan area for both private and public construction projects. We specialize in asphalt paving, land excavating, utilities, concrete, demolition, soil stabilization, sediment control/storm water management and commercial snow removal. Uniquely qualified to manage the entire construction project for our customers, Gray &amp; Son has the resources to provide many types of construction site work and restoration projects, including residential subdivisions, commercial lots, roadways, schools, park construction, health-care facilities, churches, athletic fields, industrial sites, shopping centers and more. We put pride in everything we do at Gray &amp; Son ... from owning all of our fleet and reinvesting in our business, to ensuring that all of our employees and work sites are safe, to serving our customers and our community with unsurpassed service. After all, our reputation depends on it. 
<h3>Company Description</h3>
Gray &amp; Son was founded in 1908 with a name synonymous with quality in commercial and residential construction. Through the years, we’ve expanded our services, added to our fleet and welcomed new employees, but we’ve never stopped living up to our name.\r\n\r\nToday, Gray &amp; Son is a leading contractor in the Baltimore metropolitan area for both private and public construction projects. We specialize in asphalt paving, land excavating, utilities, concrete, demolition, soil stabilization, sediment control/storm water management and commercial snow removal.\r\n\r\nUniquely qualified to manage the entire construction project for our customers, Gray &amp; Son has the resources to provide many types of construction site work and restoration projects, including residential subdivisions, commercial lots, roadways, schools, park construction, health-care facilities, churches, athletic fields, industrial sites, shopping centers and more.\r\n\r\nWe put pride in everything we do at Gray &amp; Son ... from owning all of our fleet and reinvesting in our business, to ensuring that all of our employees and work sites are safe, to serving our customers and our community with unsurpassed service.\r\n\r\nAfter all, our reputation depends on it.

Asphalt Milling Machine Operator

<h3>Job Description</h3>
Job Description
About the Job
Tool &amp; Die Technicians will maintain, rework, and fabricate dies and tools for production requirements, as well as perform changeovers.
 
Roles and Responsibilities
<ul>
<li>Maintain existing dies and perform changeovers.</li>
<li>Fabricate dies and tools; rework dies for production requirements.</li>
<li>Collaborate with tool room, production, engineering, quality, and other departments.</li>
<li>Participate in pre-planning and design of new tooling, refurbishment, end-of-life tooling, and capacity tooling as required.</li>
<li>Take part in tooling design and print review meetings and project overview meetings.</li>
<li>Plan and layout work according to models, blueprints, drawings, or written/oral specifications.</li>
<li>Understand the working properties of common methods and alloys.</li>
<li>Select appropriate materials, tools, and processes required to complete tasks.</li>
<li>Operate various tool and die maker tools and precision measuring instruments, working to close tolerances.</li>
<li>Evaluate and repair dies to bring parts into specifications; troubleshoot problem dies.</li>
<li>Work closely with production personnel, EDM, and machine set-up operators to ensure dies and tooling meet specifications.</li>
<li>Document all information and procedures related to tools (logbooks, updated drawings).</li>
<li>Set up and service all tool room and related equipment.</li>
<li>Maintain a clean, organized work area.</li>
<li>Actively participate in 5S and other Continuous Improvement initiatives.</li>
<li>Follow all safety and environmental guidelines, as well as company policies and procedures.</li>
<li>Perform other duties as assigned.</li>
</ul>
 
Education, Experience, and Skills
<ul>
<li>3–5 years of experience working with and troubleshooting dies.</li>
<li>Fully qualified completion of apprenticeship or required hours.</li>
<li>Proven ability to troubleshoot tool &amp; die problems.</li>
<li>Ability to read blueprints and die support documentation.</li>
<li>Experience using standard and specific tool room machinery, including but not limited to drill presses, die wash stations, grinders, mills.</li>
<li>Able to adapt, multitask, and prioritize in a fast-paced manufacturing environment.</li>
<li>Strong commitment to continuous improvement.</li>
<li>Knowledge of IATF 16949 &amp; ISO 14001 procedures.</li>
</ul>
 
Physical Demands
<ul>
<li>Ability to lift up to 55 pounds.</li>
<li>Regular standing, bending, lifting, twisting, climbing ladders, and walking on a cement floor.</li>
</ul>
 
Measures of Performance
<ul>
<li>Accuracy and integrity of work.</li>
<li>Ability to continually develop skills and adapt to new technologies.</li>
<li>Annual appraisal of core skills and competencies.</li>
<li>Technical/functional job performance.</li>
<li>Collaboration with team members.</li>
<li>Customer and quality focus.</li>
<li>Innovation and initiative.</li>
<li>Commitment to learning and development.</li>
<li>Attendance record.</li>
<li>Timely completion of assigned tasks and goals.</li>
</ul>
Company DescriptionLocally-owned since 1986, Pro Resources is an employment services firm specializing in short-term and long-term staffing, direct hire, recruiting and consulting. We find the qualified workers you need in the light industrial, and professional/clerical fields. Innovative human resources solutions are our strength. The Tool and Die Maker position is a DIRECT HIRE opportunity with a reputable manufacturer in Logansport, IN. At Pro Resources, we are more than just a staffing firm. We will help you upgrade your entire human resources strategy, from recruiting to training to worksite environment. We look forward to helping you find the right people and provide a custom fit for your staffing needs. 
<h3>Company Description</h3>
Locally-owned since 1986, Pro Resources is an employment services firm specializing in short-term and long-term staffing, direct hire, recruiting and consulting. We find the qualified workers you need in the light industrial, and professional/clerical fields. Innovative human resources solutions are our strength. The Tool and Die Maker position is a DIRECT HIRE opportunity with a reputable manufacturer in Logansport, IN.\n\nAt Pro Resources, we are more than just a staffing firm. We will help you upgrade your entire human resources strategy, from recruiting to training to worksite environment. We look forward to helping you find the right people and provide a custom fit for your staffing needs.

Tool and Die Maker

<h3>Job Description</h3>
Job DescriptionProduction Team Lead (Food Production) Lewisville, TX 75057 Hours: 5:00am - 1:30pm M-F Pay Rate: $17.00/hr ***REFERRAL PROGRAM***ZERO COST WELLNESS PLAN***PAID HOLIDAYS*** We are seeking a dedicated and experienced Production Lead to join our team in Lewisville, TX. The Production Lead will oversee daily production operations, ensuring efficiency, quality, and safety standards are met. This role requires strong leadership skills, attention to detail, and the ability to work in a fast-paced environment. Culture Our staffing professionals are committed to meeting your individual needs and exceeding your expectations. Experienced top-quality candidates are the result of our extensive screening process, in-depth evaluations, industry-specific testing, and reference checking. Responsibilities Key Responsibilities: 
<ul>
<li>Supervise and coordinate production activities to meet daily targets.</li>
<li>Ensure compliance with safety and quality standards.</li>
<li>Train and mentor production staff.</li>
<li>Monitor production processes and implement improvements.</li>
<li>Maintain accurate production records and reports.</li>
<li>Collaborate with other departments to optimize production flow.</li>
</ul>
Qualifications: 
<ul>
<li>High school diploma or equivalent; additional education or certifications in production management is a plus.</li>
<li>Minimum of 3 years of experience in a production or manufacturing environment.</li>
<li>Strong leadership and team management skills.</li>
<li>Excellent problem-solving abilities.</li>
<li>Ability to work flexible hours, including weekends and holidays.</li>
<li>Proficiency in Microsoft Office Suite.</li>
</ul>
 Requirements Authorized to work in the US without sponsorship Bilingual/Spanish Equal Opportunity Employer Hire Energy provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requisition #cm90xx9bs6h1e0iqp9x3t2gsf

Bilingual Food Production Lead

<h3>Job Description</h3>
Job Description
<ul>
<li>The Brake Interface Components Design Release Engineer is responsible for the design and validation of brake tubes, brake hoses, and wheel speed sensors.&nbsp;&nbsp;The position will include all aspects of component design to ensure all system and vehicle level functional objectives are met.&nbsp;&nbsp;Job responsibilities include but not limited to:&nbsp;&nbsp;managing the release of the components, bill of material, CAD drawings, design verification plan, physical testing, management of suppliers, issuing change notices, vehicle build support, issue resolution, and PPAP. The engineer will:</li>
<li></li>
<li>Interface with Vehicle Engineering, suppliers, Purchasing, Quality and Assembly Plants.&nbsp;</li>
<li>Manage product performance to meet functional, cost and weight targets.</li>
<li>Perform product release and change management processes.</li>
<li>Direct packaging in vehicle environment</li>
<li>Manage supplier and internal DVPR’s and DFMEA’s</li>
<li>Support AQP, PSO, product launch and ongoing maintenance of carryover product.</li>
<li>Be responsible for design and release of designated components.</li>
<li>Develop and refine routings for brake tubes, brake hoses, and wheel speed sensors, considering functional, safety, reliability, and performance requirements.</li>
<li>Requirements: The engineer must have:</li>
<li>Bachelor of Science in Mechanical, Automotive or Electrical Engineering from an accredited institution or ABET equivalent.</li>
<li>Aptitude for mechanical engineering demonstrated by work experience or academic projects.</li>
<li>Strong communication skills, including the ability to interface with suppliers and internal cross-functional teams.</li>
<li>Minimum 3-5 years experience. Preferred Qualifications: A preferred candidate would possess:
<ul>
<li>Strong GD&amp;T skill set.</li>
<li>Strong project management skills/experience</li>
<li>Proficiency in engineering disciplines, such as DVPR, DFMEA, etc.</li>
<li>Formal training/experience in problem solving, quality and reliability.</li>
<li>Design for Six Sigma (DFSS) Green belt / Black Belt certification.</li>
<li>Action oriented and customer focused.</li>
<li>Experience in manufacturing of vehicle components and vehicle assembly.</li>
<li>Previous experience with brake tubes, brake hoses, wheel speed sensors</li>
</ul>
</li>
</ul>
Company DescriptionG-TECH is a WBENC-certified, women-owned recruitment and staffing firm with over 30 years of expertise in Engineering, IT, and Professional sectors. We partner with Fortune 100 corporations and mid-sized businesses, delivering top-tier talent that fuels innovation. Specializing in contingent staffing, direct placements, and project-based assignments, we craft customized workforce solutions that align with your unique business needs. At G-TECH, we bridge the gap between exceptional professionals and leading organizations, ensuring the right talent powers your success. 
<h3>Company Description</h3>
G-TECH is a WBENC-certified, women-owned recruitment and staffing firm with over 30 years of expertise in Engineering, IT, and Professional sectors. We partner with Fortune 100 corporations and mid-sized businesses, delivering top-tier talent that fuels innovation. Specializing in contingent staffing, direct placements, and project-based assignments, we craft customized workforce solutions that align with your unique business needs. At G-TECH, we bridge the gap between exceptional professionals and leading organizations, ensuring the right talent powers your success.

Brake Interface Componets DRE

<h3>Job Description</h3>
Job Description
2nd Shift (2:30pm - 11:00pm Mon - Fri) PAY RATE: $21.50 / hr
 
Job Summary
The Assembler II performs moderately complex electronic and electro-mechanical assembly tasks for Department of Defense (DoD) products. This role involves assembling, soldering, wiring, inspecting, and testing components and finished products according to detailed engineering drawings and industry standards. The position requires strong attention to quality, adherence to safety/ESD protocols, and the ability to support continuous improvement on a 2nd-shift schedule.
Key Responsibilities
<ul>
<li>Assemble electronic components, wiring, and hardware into sub-assemblies and final units.</li>
<li>Perform soldering, wiring, crimping, and mechanical assembly using proper tools and techniques.</li>
<li>Inspect assemblies for quality and compliance with IPC/J-STD and company standards.</li>
<li>Identify and report defects or nonconformances and support corrective actions.</li>
<li>Maintain accurate assembly, production, and inspection documentation.</li>
<li>Follow all ESD, FOD, and safety procedures.</li>
<li>Collaborate with engineering, quality, and production teams to resolve technical issues.</li>
<li>Contribute to continuous improvement efforts for quality and efficiency.</li>
</ul>
Required Skills:
<ul>
<li>Proficient in soldering, wiring, and electronic assembly</li>
<li>Ability to read engineering drawings and schematics</li>
<li>Knowledge of IPC-A-610 / J-STD-001 standards</li>
<li>Strong attention to detail and quality control</li>
<li>Manual dexterity with small parts and hand tools</li>
<li>Basic problem-solving and defect identification skills</li>
</ul>
Company DescriptionSelect Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs. Based in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities 
<h3>Company Description</h3>
Select Source International (SSI) is a distinguished staffing company with nearly 25 years of experience, renowned for delivering top-tier workforce solutions encompassing staffing, recruiting, and managed services. As a proud supplier, we bring a wealth of expertise and best-in-business differentiators to comprehensively support your diverse workforce needs.\r\n\r\nBased in Minneapolis, Minnesota, USA, SSI has established itself as a global leader, serving a broad clientele across industries with unwavering dedication and excellence. SSI is ISO 9001, 14001, and Soc2 Type2 certified, underscoring our commitment to quality and security. We have garnered numerous sustainability and supplier diversity awards, further validating our industry-leading capabilities

205,370 Manufacturing Jobs