field_job_employment_type

field_job_occupational_field_parents_all

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionDo you turn complex power challenges into production-ready solutions?
Imagine owning the electrical heartbeat of each vehicle build. If you enjoy diagnosing power issues, crafting clean schematics, and making sure every device receives the right energy, this AC/DC Vehicle Systems Engineer role is for you.
Your mission
Enable Production to succeed through precise, consistent electrical design and integration—delivered on schedule and built to exceed our standards of excellence.
Scenarios you’ll tackle
<ul>
<li>Hand off clear, actionable design intent to the production floor, translating complex requirements into practical steps.</li>
<li>Generate accurate electrical designs, layouts, and schematics under defined timelines.</li>
<li>Terminate cabling at power outlets, equipment, and the central electrical power cabinet—cleanly and reliably.</li>
<li>Route AC and DC cabling throughout vehicles to ensure every subsystem is properly powered.</li>
<li>Cut access points and drill runs so AC/DC wiring and controls are neatly and safely installed.</li>
<li>Splice wiring and solder connections to fixtures and equipment; troubleshoot and repair equipment issues as they arise.</li>
<li>Work independently with exceptional attention to detail; inspect your work and validate it against quality standards.</li>
</ul>
How you’ll partner
Collaborate closely with Engineers, Designers, Drafters, and Production staff in a high-efficiency team setting. Your clarity and follow-through align design with execution.
Must-have strengths
<ul>
<li>Fluency in electrical schematics</li>
<li>Expert electrical troubleshooting skills</li>
<li>Experience with electrical/electronic systems</li>
<li>An engineering degree</li>
</ul>

AC/DC Vehicle Systems Engineer

<h3>Job Description</h3>
Job DescriptionKSM Industries&nbsp; Germantown, WI Powder Painter JOB DUTIES:
<ul>
<li>Operate powder coating equipment, including spray guns, conveyor systems, wash systems, curing ovens, to efficiently coat metal products</li>
<li>Visually inspect parts and prepare surfaces for coating by cleaning, sanding, masking and applying appropriate pre-treatment chemicals</li>
<li>Perform quality inspections before, during and after coating application to ensure adherence to specifications and standards, this includes proper paint application and thickness by using mil-gauge testing equipment</li>
<li>Adjust equipment settings as needed to achieve desired coating thickness, texture and color consistency</li>
<li>Monitor and troubleshoot any equipment issues and perform routine maintenance to keep powder coating line running smoothly.</li>
<li>Work collaboratively with team members to prioritize tasks, meet production deadlines and maximize efficiency</li>
<li>Adhere to safety protocols and guidelines to prevent accidents and ensure a safe working environment</li>
<li>Maintain a clean and organized work area, including proper storage of coatings, tools and equipment.</li>
<li>Perform related work as assigned, e.g. sanding, cleaning, hanging parts on conveyor, masking.</li>
<li>Maintain department records as directed.</li>
</ul>
EDUCATION AND EXPERIENCE REQUIREMENTS:
<ul>
<li>Proven experience working as a powder painter in a manufacturing or industrial setting</li>
<li>Strong understanding of powder coating techniques, equipment operation and industry best practices</li>
<li>Ability to interpret technical drawings, specifications and work instructions</li>
<li>Knowledge of safety procedures and PPE requirements for working with powders and chemicals</li>
<li>Effective communication skills and the ability to work collaboratively in a team environment</li>
<li>Flexibility to work on different shifts and schedules to support production requirements</li>
<li>Strong attention to details and a willingness to learn and adapt to new technologies and processes</li>
</ul>
 This job description outlines the key responsibilities for the position of powder painter, emphasizing the importance of precision, safety and teamwork in achieving successful powder coating applications. &nbsp;
We Make it Easy
Founded in 1901, MRA is a nonprofit employer association that serves more than 4,000 employers, covering more than one million employees.
As one of the largest employer associations in the nation, MRA helps its member organizations thrive by offering the most comprehensive assortment of HR services, information, education, and resources to help build successful workplaces and a powerful workforce.
We partner with these companies working directly with their HR department and leadership to hire their talent. We are a direct line to the company, not an agency recruiter.
Powered by JazzHR
0LjqpBHpgH

Powder Painter

<h3>Job Description</h3>
Job Description
<ul>
<li>Responsible for providing leadership and direction to assigned department(s), product line(s) or profit center(s) and teams in order to meet production goals, ensure a safe work environment, and meet customer specifications.</li>
<li>Typically supervises 100+ employees including both salaried and hourly.</li>
<li>Schedule, track, &amp; monitor production and costs to ensure unit meets established goals while maintaining a safe work environment and quality standards.</li>
<li>Maintain effective workforce through hiring, training, coaching and disciplinary actions.</li>
<li>Implement and demonstrate best practices and consistent policies.</li>
<li>Complete and maintain timely and accurate reports on critical production outcomes such as efficiency, downtime, cost, etc.</li>
<li>Provide feedback up and down the organization.</li>
<li>Develop and implement safety awareness programs, communicate safety issues, correct safety related problems, and lead investigations into safety related issues.</li>
<li>Participate in designing and implementing continuous improvement processes.</li>
</ul>

Production Manager

<h3>Job Description</h3>
Job DescriptionDIRECT HIRE: A fantastic opportunity for a leader and team-player to join a dynamic team in the Farmington, CT. area.&nbsp; The CNC Machinist/Toolmaker is responsible for performing precision Jig Grinding as the primary function, ensuring the highest levels of accuracy and quality in toolmaking and machining operations. The candidate also operates and maintains various types of equipment including manual milling machines, CNC milling machines, OD grinders, and surface grinders. The CNC Machinist/Toolmaker utilizes advanced measurement techniques and inspection tools to verify dimensions and tolerances. Hourly Range: $35hr - $40hr Base hours: M - F, 8am - 5pm (flexible) Benefits: Medical, Dental, Vision, 401K, Life Insurance, Long-Term Disability, PTO, Holidays Role &amp; Responsibilities:
<ul>
<li>Perform precision Jig Grinding operations to tight tolerances on a variety of components</li>
<li>Operate manual and CNC milling machines, OD grinders, and surface grinders as needed to support production and tooling requirements</li>
<li>Set up and maintain equipment, ensuring accurate alignment and calibration</li>
<li>Read and interpret complex blueprints, engineering drawings, and geometric tolerances</li>
<li>Use sine plates and other precision setup tools to achieve required angles and dimensions</li>
<li>Apply advanced math and trigonometry skills to calculate dimensions, setups, and offsets without assistance</li>
<li>Perform in-process and final inspections using precision measuring instruments such as micrometers, indicators, and height gauges</li>
<li>Maintain a clean and organized work area, following all safety and quality procedures</li>
<li>Collaborate with engineering and quality departments to resolve machining and tooling challenges</li>
<li>Support continuous improvement initiatives and contribute to process optimization</li>
</ul>
Qualifications:
<ul>
<li>Must possess at least 4 years of Senior/Lead experience</li>
<li>Strong experience in precision Jig Grinding (preferred)</li>
<li>Proficiency in manual machining, CNC milling, OD and surface grinding</li>
<li>Skilled in the use of sine plates, indicators, and precision measuring tool</li>
<li>Solid understanding of trigonometry and machining mathematic</li>
<li>Toolmaking background or equivalent experience in precision manufacturing</li>
<li>Willingness to perform Jig Grinding as the primary daily task</li>
<li>Consideration given to experienced toolmakers interested in training for Jig Grinding</li>
</ul>
Once you apply with your updated resume, please text "SrCNC" to 904-712-6140 for a faster reply.&nbsp; INDH
Powered by JazzHR
4HtgXZ6n3Q

Senior CNC Machinist/Toolmaker

<h3>Job Description</h3>
Job Description
Job summary:
Employees work either individually or as a team to in the manufacturing and distribution of sofas, loveseats, and chairs. This job requires manual dexterity, fine motor skills, and attention to detail to meet high quality standards.
Summary of essential job functions:
<ul>
<li>Feed raw materials into production machinery</li>
<li>Supply materials to other departments/team members</li>
<li>Assemble furniture on production lines</li>
<li>Use tools to assemble/manufacture furniture</li>
<li>Monitor the production process</li>
<li>Carry out basic quality and testing checks</li>
<li>Store goods and raw materials properly in our warehouse</li>
<li>Pack goods to be shipped</li>
<li>Maintain work areas and equipment</li>
<li>Inform management if problems arise</li>
<li>Other duties to be performed as directed by supervisor(s)</li>
</ul>
Additional Requirements:
<ul>
<li>Previous fast paced manufacturing experience strongly preferred</li>
<li>Must have good hand-eye coordination</li>
<li>Ability to use&nbsp;power tools (such as staple guns) to assemble parts</li>
<li>Must perform job with safety as top priority</li>
<li>Must be able to bend and lift parts throughout shift</li>
<li>Must be able to stand on feet for entire shift (8 – 10 hours per day)</li>
<li>Ability to show up to work on-time, every day, and take direction from supervisor(s) in a fast-paced environment</li>
<li>Must be able to lift up to 50 lbs repetitively on a daily basis</li>
</ul>
Benefits:
<ul>
<li>401K</li>
<li>Medical</li>
<li>Dental and Vision</li>
<li>Life, Short Term Disability, Critical Illness, and Accident Plans</li>
<li>Family owned company for over 80+ years</li>
</ul>
Powered by JazzHR
rdwOTKX0dN

1st Shift - Manufacturing Associate

<h3>Job Description</h3>
Job Description
Job summary:
Inspectors work throughout the plant but primarily at the end of the Upholstery line to inspect finished furniture before it is sent to the Shipping department. This position requires a close attention to detail and the ability to work in a fast-paced environment.&nbsp;
Summary of essential job functions:
<ul>
<li>Inspects completed furniture for defects in finish, construction, or upholstery, to ensure conformance with manufacturing standards: Verifies color, pattern, and grade of upholstery, using ticket specifications</li>
<li>Inspects upholstery cover for rips in fabric or seams</li>
<li>Feels upholstery padding to determine if padding conforms to specified degree of firmness</li>
<li>Examines wooden surfaces for defects in assembly, wood, or finish</li>
<li>Removes wrinkles, using hand steamer and removes soil marks using cleaning fluid</li>
<li>May stamp or mark furniture to indicate acceptation or rejection</li>
<li>May repair minor defects in finish, using heated blade, wax, lacquer, and stain stick</li>
</ul>
Minimum requirements:
<ul>
<li>High school diploma preferred, and previous furniture inspection experience highly preferred</li>
</ul>
Abilities required:
<ul>
<li>Good hand-eye coordination and manual dexterity</li>
<li>Attention to detail/high quality expectations</li>
<li>Must perform job with safety as a top priority</li>
<li>Must be able to show up to work on-time, every day, and take direction from supervisor(s)</li>
<li>Ability to work in a fast-paced environment</li>
<li>Must be able to stand on feet for entire shift (8 to 10 hrs. per day)</li>
<li>Ability to get along with others and work in a team environment</li>
<li>Must be able to lift up to 50 lbs. repetitively on a daily basis</li>
</ul>
Benefits:
<ul>
<li>401K</li>
<li>Medical</li>
<li>Dental</li>
<li>Short Term Disability</li>
<li>Vacation Pay</li>
<li>Great Pay, Great Company, Great Atmosphere</li>
<li>Family owned company for over 80+ years</li>
</ul>
Legal Disclaimer:&nbsp;Jackson Furniture is an Equal Opportunity and Affirmative Action employer. It is our practice to provide equal employment and advancement opportunities to all individuals. All employment decisions and related entities will be made on merit, qualifications, and abilities. It is our policy and commitment to ensure equal opportunity is provided in all employment opportunities and practices, regardless of race, color, religion, age, marital status, sex, sexual orientation, gender identity, genetic information, national origin, veteran status, disability, or any other characteristic protected by law. Jackson Furniture is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individuals with disabilities.
Powered by JazzHR
zTOlYzRubq

Quality Inspector

<h3>Job Description</h3>
Job DescriptionPosition: Battery Manufacturing Technician - Cell Assembly Reports To: Senior Battery Engineer
Coreshell's metallurgical Silicon anode technology delivers high capacity, fast-charging, and superior safety. Our low-cost liquid-phase nano-coating addresses critical electrode-surface degradation issues and enables batteries with a Silicon-dominant anode that have higher energy density, superior intrinsic thermal safety, and significantly lower cost/kWh compared to current LIBs. Our Si anode material is 50% the cost of graphite and 100% domestically sourced. We strive to transform the global automotive market by enabling low-cost and long-range EVs as a first step towards net-zero sustainability in the near future.
Position: We are looking for a Battery Manufacturing Technician with battery construction, manufacturing, and/or R&amp;D lab experience and programming/coding skills to carry out electrode fabrication, cell assembly, electrochemical testing, and data analysis
Core Responsibilities:
<ul>
<li>Coat and calendar Coreshell’s 60Ah-scale electrode rolls following strict specifications.</li>
<li>Operate complex electrode fabrication machinery on the Pilot Line. Must be comfortable performing some manual tasks such as lifting weights no heavier than 25kg.</li>
<li>Characterize electrode features and defects using materials analytical techniques such as SEM/EDX, adhesion testing, resistance measurements, etc..</li>
<li>Clean equipment and tools after electrode production runs in a timely manner.</li>
<li>Record parameters used and observed in cell/electrode fabrication processes in runsheets.</li>
<li>With the assistance of the Manufacturing team, characterize cells and battery materials, using both electrochemical methods &amp; materials analytical techniques.</li>
<li>Report inventory of manufacturing consumables.</li>
<li>Follow and maintain standard operating procedures (SOPs).</li>
<li>Comfortable performing manual tasks requiring precision and dexterity.</li>
</ul>
Required experience:
<ul>
<li>Background in cell assembly or R&amp;D lab work is required. Experience working in controlled-atmosphere dry rooms is preferred.</li>
<li>Background in fabrication of lithium-ion batteries is a plus.</li>
<li>Highly self-driven, detail-oriented candidate with a history of problem solving and an ability to wear many hats.</li>
<li>Familiarity with chemistry lab safety protocols. Demonstrated commitment to maintaining safe, tidy, and organized work areas.</li>
<li>Previous experience performing electrical tests, as well as chemistry and materials analytical instruments, is preferred.</li>
</ul>
Required Qualifications: 2+ years of experience in the battery industry OR a B.S. degree or equivalent in Chemistry, Materials Science, Engineering, or similarly relevant field.
Location &amp; Benefits: San Leandro, CA. Full-time. Hourly rate is $30-35 per hour with additional stock incentives dependent on experience. Dental, vision, healthcare and 401(k) benefits are included. Applications will be screened as received.
 &nbsp;
Powered by JazzHR
h13I69uo36

Battery Manufacturing Technician - Cell Assembly

<h3>Job Description</h3>
Job Description 
Why Join Our Team?
Do you want to be part of a team that is making a positive difference in lives across the globe? Do you want to be part of a culture where you are recognized, respected, and rewarded for a job well done? U.S. Pipe has been providing quality water and wastewater products since 1899, and for over the past 125 years we have proudly supported local governments, municipalities, water departments, and businesses across the United States, and the world.
What We Offer:
<ul>
<li>Team Collaboration: Join a team-oriented environment where collaboration is not just a buzzword but a priority.</li>
<li>Career Growth: Be part of an industry leader renowned for world-class design, manufacturing, sourcing, and distribution, and take your career to the next level.</li>
<li>Comprehensive Benefits: We provide a comprehensive benefits package with options tailored to meet your needs and those of your family.</li>
</ul>
About the Role:
U.S. Pipe and Foundry is seeking talent to join our Engineering Team as a Metallurgist. This position provides technical guidance to Operations in the areas of melting, casting and heat treatment for the production and processing of ductile iron pipe. The candidate must be able to relocate to Birmingham, Alabama.
Specific Responsibilities:
<ul>
<li>Involved in all phases of the iron melting, processing, holding and casting operations. </li>
<li>Providing input on Alloy selection, raw material inspection, storage and usage, Refractory selection, application and use.</li>
<li>Delivering iron having close temperature and chemical composition tolerances done at or below budgeted cost.</li>
<li>Chemical analyses techniques and determining the proper metallic mix for melting and proper alloy additions. </li>
<li>On all phases of the casting process including mold condition, machine condition, machine set-up, alloy additions and pipe handling.</li>
<li>On all phases of the annealing process including temperature control, oven variables, and oven condition.</li>
<li>Reviewing operating reports, evaluating cost data, the type and quantity of pipe produced, defectives, etc., to determine corrective actions needed.</li>
<li>Works closely with Operations personnel to discuss problems and recommends solutions.</li>
<li>Take corrective actions as required.</li>
<li>Evaluates new alloys and materials; develops new processes and procedures as well as training on their use.</li>
<li>Recommends and explains benefits of new technology to plant management for evaluation.</li>
<li>Assists in Training on the Technical aspects of the processes in use.</li>
<li>Performs other related duties as required.</li>
</ul>
Skills and Qualifications:
<ul>
<li>College graduate with a degree in Metallurgical Engineering or Materials Science or five to seven years’ experience in the application of this knowledge to activities, such as supervision, safety, technical know-how and labor relations. </li>
<li>Familiarity with coreless and channel electric melting processes. </li>
<li>Experience in interpreting the metallography of the iron to determine compliance to process parameters and changes required, assess the quality of welds, and other issues that may arise.</li>
<li>Possesses the ability to train the metallurgical aspects of the operations.</li>
<li>The equivalent knowledge and training in order to provide a working knowledge of the regulations, practices, specifications and procedures concerned with the operations of the Company. </li>
<li>Must have the ability to communicate with others in this technology. </li>
<li>Must understand cost data, specifically related to the melting operation and in general to the plants as a whole. </li>
</ul>
Scope Data/Working Conditions/Physical Demands:
<ul>
<li>The employee will be working in an office environment but will be walking through the plant on a regular basis exposing the employee to foundry operations. </li>
<li>The employee will be exposed to the following working conditions: extreme heat and cold, noise, vibration, oils, and atmospheric conditions such as dust, fumes, and metallic particles.</li>
<li>The employee will be required to perform the following actions regularly: standing, walking, balancing, stooping, kneeling, reaching, talking, seeing, hearing and sitting. The majority of the actions will be standing and walking.</li>
</ul>

Metallurgist

<h3>Job Description</h3>
Job DescriptionJoin General Machine in Freeburg, IL
At General Machine, a growing machine shop and fabricator in Freeburg, IL, we earn the trust of demanding customers by delivering exceptional quality. We’re expanding our team with a skilled machinist who takes pride in turning blueprints into flawless parts.
The Opportunity
Own the setup and operation of CNC and/or manual mills and lathes to produce precision components. You’ll interpret drawings, verify dimensions with precision metrology tools, and keep machines running at peak performance while collaborating with engineers and programmers to refine processes.
A Day in the Life
You arrive to a clean, organized workstation. The day starts by reviewing prints and specs, planning setups, and selecting tooling. After dialing in offsets, you run first articles, measure with calipers and micrometers, and make fine adjustments to hit tight tolerances. Throughout your shift, you monitor machine performance, document production details, and partner with the team to drive efficiency and quality.
What You’ll Do
<ul>
<li>Set up, operate, and fine-tune CNC and/or manual mills and lathes.</li>
<li>Read and interpret blueprints, drawings, and specifications to define machining requirements.</li>
<li>Inspect and verify parts using calipers, micrometers, gauges, and other precision tools.</li>
<li>Monitor machine performance; adjust feeds, speeds, and offsets to maintain quality standards.</li>
<li>Perform routine maintenance and troubleshoot issues to minimize downtime.</li>
<li>Collaborate with engineers and programmers to improve machining processes and efficiency.</li>
<li>Maintain a clean, organized area and follow all safety protocols.</li>
<li>Complete production documentation and keep accurate job records.</li>
</ul>
What You Bring
<ul>
<li>Hands-on experience in machining (CNC and/or manual).</li>
<li>Ability to set up and operate CNC mills, lathes, and/or manual machines.</li>
<li>Familiarity with G-code programming is a plus (not required).</li>
<li>Proficiency with measurement tools: calipers, micrometers, gauges, etc.</li>
<li>Strong troubleshooting and problem-solving mindset.</li>
<li>Attention to detail and a commitment to high-quality work.</li>
<li>Comfort working independently and on a team in a fast-paced environment.</li>
</ul>
If you’re passionate about precise work and continuous improvement, we invite you to apply and grow with General Machine.

Precision CNC/Manual Machining Specialist

<h3>Job Description</h3>
Job Description
We are looking for a friendly and organized Vacation Planning Coordinator to help clients plan enjoyable trips from home. In this role, you’ll assist with putting together travel plans, researching options, and helping ensure that travelers feel supported throughout the process. This position is great for someone who enjoys planning, communicating, and helping others enjoy stress-free vacations.
Key Responsibilities:
<ul>
<li>
Work with clients to learn about their vacation interests and preferences
</li>
<li>
Assist in creating trip ideas, options, and planning outlines
</li>
<li>
Support hotel, transportation, and activity reservation coordination
</li>
<li>
Stay in touch with clients and provide helpful updates when needed
</li>
<li>
Communicate with travel providers to confirm information
</li>
<li>
Share trip details, confirmations, and destination information
</li>
<li>
Ensure accuracy and clarity in all travel arrangements
</li>
</ul>
Qualifications:
<ul>
<li>
Experience in customer service or hospitality is helpful but not required
</li>
<li>
Strong communication and people skills
</li>
<li>
Able to stay organized and manage multiple tasks
</li>
<li>
Comfortable working online and remotely
</li>
<li>
Self-directed and dependable
</li>
<li>
Interest in travel and trip planning
</li>
<li>
Additional languages welcomed but optional
</li>
</ul>
What We Offer:
<ul>
<li>
Remote work flexibility
</li>
<li>
Training materials and travel learning resources
</li>
<li>
Supportive team culture
</li>
<li>
Access to tools used in the travel planning process
</li>
</ul>

205,394 Manufacturing Jobs